Aines Manufacturing Corp. Product Catalog
Click on the link below to view the product's picture and features.
NEW Products:
Model 1 "STOPWATCH"®
240 HAL Tone Generator
500SMP Stationman Filter Probe
CATV/COAX Tester Model 1 "STOPWATCH"®
Tone out CATV CABLES (coax) with the AINES Model 1 "STOPWATCH"®
using a conventional toner and probe.
Identify CATV riser cables and in house lateral feeds.
Need more information? Click below to:
View the Aines online manual for this product.
Get a print ready copy of the Aines catalog page for this product.
Return to the top of the screen.
CATV/COAX Tester 240 HAL Tone Generator
The AINES 240 HAL Tone Generator is a water resistant tone generator equipped with a weathertite 2 conductor modular cord and jack. The set can be connected to the Network Interface Device (NID) with either the two individual clips or the modular cord. This allows the CPE circuit to be viewed in both directions, towards the Central Office and towards the customer premise. In the event the CPE does not have a jack, but instead has a cord, plug the cord into the Model 240s jack and transmit tone!
Features:
The following tests can be performed using the 240 HAL Tone Generator
Trace cable pairs.
Locate cables in walls when used with
either the AINES 150SP STATIONMAN
Probe, the AINES 250SSP Speaker
Probe or the 500SMP Stationman
Filter Probe.
Provide talk battery on dead pairs.
Check for shorts and opens using the
LED. When using the modular cord, the
test set will also show if the modular
wall box is grounded.
Continuity test.
Tip & Ring identifications.
Line condition identification.
 
a. Clear Line
b. Busy Line
c. Ringing Line
Positive line verification.
Specifications:
Integrated circuitry.
Dual Tone capability (1000 hertz
continuous tone and 500/1000 hertz
alternating tone.
3 color Light Emitting Diode (LED).
Green - Proper polarity. Red - Reversed polarity. Yellow - Grounded wall box.
Weathertite and Water resistant.
Heavy Duty case.
Aines 6A heavy duty test clips for greater wear and flexibility.
Power source needed; 9Vdc battery: 216 Eveready, VS323 RCA, 006P import or equivalent.
Dimensions: 2.5 inches Wide, 1.5 inches Deep, 3.75 inches High. Weight: 4.5 ounces.
Need more information? Click below to:
View the Aines online manual for this product.
Get a print ready copy of the Aines catalog page for this product.
Return to the top of the screen.
 
500SMP Stationman Filter Probe
Coming Soon!
Check back to learn more about the 500SMP Stationman Filter Probe.
Click here to return to the top of the screen.
Copyright 1998 by Aines Manufacturing Corporation, Ronkonkoma NY 11779
Phone: 1-800-526-2463 - Fax: 1-631-471-3625
Site designed by PW Designs (516) 456-8358 pwdesigns411@yahoo.com