 |
| |
|
|
| Aines
Manufacturing Corp. Product Catalog |
 |
| Click
on the link below to view the product's picture and
features. |
| Clips,
Cords, and AINES Patented "K"
Plug (Patent: #5,562,475/#5,893,771/#5,993,237) |
| |
|
|
| Click
here to view additional custom Cords for butt sets and
test sets. |
| The
following descriptions for custom Test Set cords are
but a sampling of the custom cable assemblies that Aines
Manufacturing Corp. offers. |
| Just
because you don't see it, it doesn't mean we can't make
it!! |
| These
cords are manufactured from tinsel conductor, insulated
with PVC, and are nylon braided with material which
meets MIL SPEC. C-83501. Materials used in the manufacture
of the AINES replacement test set cords meet both AT&T
and Bellcore specifications. All cords, clips, and boots
are manufactured in the United States at our Ronkonkoma,
New York plant. |
| Custom
cords are our business! |
| We
have many more cords and you can also call for quotes
on custom cable assemblies, |
| call
1-631-471-3900 for information. |
| |
|
|
| K
Plug (Patent: #5,562,475/#5,893,771/#5,993,237) |
| The
only modular plug specifically designed
for both inside and outside plant use. |
| Features: |
|
No
tab to break off. |
|
Available
with two, four, or six contacts. |
|
Will
fit any RJ11 and RJ45 jack. |
|
Built
for rugged use from super strong |
| |
polycarbonate
material. |
|
The
"K" Plug will fit crimping
tools |
| |
designed
for RJ11 and RJ45 |
| |
(8
contacts) plugs. |
|
Can
be used with gloves on. |
|
Designed
for ease of insertion and removal
|
| |
particularly in difficult to reach
locations. |
|
| |
|
 |
|
 |
| |
| Return
to the top
of the screen. |
|
|
| 6A
Clip |
| Clip
material is nickel silver. This clip has
a 20 degree offset jaws to gaurd against
shorting. The 6A clip has a single penetrator
pin positioned near the fulcrim for easier
penetration of heavier insulation. The penetrator
pin is replaceable in the field. |
|
 |
|
| Click
below ro view other related products: |
|
|
| |
| Return
to the top
of the screen. |
|
|
| 6P
Clip |
| Clip
material is nickel silver. This clip has
a 20 degree offset jaws to gaurd against
shorting. The 6P clip in addition to a single
penetrator pin positioned near the fulcrim
has a cluster of hardened needles (nickel
plated to prevent rust) which insures penetration
of insulation on 19 to 26 gauge wires. Two
or more wires may be penetrated at once
for a temporary "splice". The
insulation "heals" as needles
are withdrawn. Stripping of insulation is
unnecessary. |
|
 |
|
| Click
below ro view other related products: |
|
|
| |
| Return
to the top
of the screen. |
|
|
| K
Plug Jumper 6 & 8 |
|
| 6
and 8 replacement "K" Plug Jumper cords are
available in any length. |
 |
| Click
here to return to the top
of the screen. |
|
|
| CS-2
Plug Resistor |
| This
cord is fitted with a 346A type plug and
switchable 1500 ohm resistor and is approximately
18" long. When switched on, the resistor
is inserted in series with the ring side
of the cord to simulate a long loop condition. |
|
 |
|
| |
| Return
to the top
of the screen. |
|
|
| CS-5
Plug Cord |
| This
cord is fitted with a 346A type plug and
is approximately 1' long. The plug allows
the use of a variety of different test cords
equipped with the matching 471A type connector.
|
|
 |
|
| |
| Return
to the top
of the screen. |
|
|
| CS-15 |
| Mate
to CS-2 or CS-5 equipped with 471A type
connector to 6A clips. |
|
 |
|
| |
| Return
to the top
of the screen. |
|
|
| CS-16 |
| Mate
to CS-2 or CS-5 equipped with 471A type
connector to 6P clips. |
|
 |
|
| |
| Return
to the top
of the screen. |
|
|
| CS-18 |
| Mate
to CS-2 or CS-5 equipped with 471A type
connector to Switchcraft 176A plug. |
|
 |
|
| |
| Return
to the top
of the screen. |
|
|
| CS-22 |
| Mate
to CS-2 or CS-5 equipped with 471A type
connector to mini clips. |
|
 |
|
| |
| Return
to the top
of the screen. |
|
|
| CS-24 |
| Mate
to CS-2 or CS-5 equipped with 360 type spring
chucks. |
|
 |
|
| |
| Return
to the top
of the screen. |
|
|
| CS-3
Ground Start |
| The
cord consists of three conductors with heavy
duty alligator clips offset 20 degrees.
In addition one of the ring conductors has
a banana jack connected to it. This jack
is located 6" below the test set and
is partially covered by the exterior fabric
of the cord. This allows for the second
ring conductor to be removed when the ground
start feature is not needed. The overall
length of this cord is 4 feet. |
|
 |
|
| |
| Return
to the top
of the screen. |
|
|
| CS-3.2 |
| Extension
to second ring lead for CS-3 with banana
plug attached. |
|
 |
|
| |
| Return
to the top
of the screen. |
|
|
| CS-7 |
| Consists
of one red and one black tinsel conductor
with jackets of braided nylon, 5 ft. long.
Each conductor is fitted with the heavy
duty alligator clips, offset 20 degrees
to minimize shorting. The clips have insulation
piercing spikes and rubber boots. The first
12" of the leads are enclosed within
a second nylon braid. |
|
 |
|
| |
| Return
to the top
of the screen. |
|
|
| CS-7.1 |
| Same
as the CS-7 with no spade locks. |
|
 |
|
| |
| Return
to the top
of the screen. |
|
|
| CS-8 |
| Same
as the CS-7 except each alligator clip is
equipped with a bed of nails in addition
to the insulation piercing spike. |
|
 |
|
| |
| Return
to the top
of the screen. |
|
|
| CS-8.1 |
| Same
as the CS-8 except the strain relief is
replaced by a brass collar. |
|
 |
|
| |
| Return
to the top
of the screen. |
|
|
| CS-36 |
| Same
as the CS-8 with the addition of a heavy
duty modular jack. |
|
 |
|
| |
| Return
to the top
of the screen. |
|
|
| CS-12 |
| This
test cord is not equipped with clips or
boots. |
|
 |
|
| |
| Return
to the top
of the screen. |
|
|
| CS-23 |
| 5
ft. test set cord terminating with mini
clips. |
|
 |
|
| |
| Return
to the top
of the screen. |
|
|
| CS-6 |
| 5
ft. tinsel wire cord equipped with universal
modular plug and four 6A clips with black,
red, green, and yellow boots. |
|
 |
|
| |
| Return
to the top
of the screen. |
|
|
| CS-9 |
| 5
ft. tinsel wire cord equipped with Switchcraft
176A plug and two 6A clips. |
|
 |
|
| |
| Return
to the top
of the screen. |
|
|
| CS-14 |
| 6
ft. test lead for 8455 type meter manufactured
from 18 AWG, 41 strand wire with rubber
insulation and a neoprene jacket. Equipped
with ring terminals, 6P clips, and rubber
boots. |
|
 |
|
| |
| Return
to the top
of the screen. |
|
|
| CS-17 |
| Tinsel
wire jumper cord 12" equipped with
mini alligator clips and boots. |
|
 |
|
| |
| Return
to the top
of the screen. |
|
|
| CS-25 |
| 3
ft. tinsel wire jumper cord equipped with
360type spring chucks. |
|
 |
|
| |
| Return
to the top
of the screen. |
|
|
| CS-26 |
| 6
ft. copper strand test lead equipped with
ring terminal and 6P clip. |
|
 |
|
| |
| Return
to the top
of the screen. |
|
|
| CS-29 |
| 6
ft. tinsel wire test set cored equipped
with Switchcraft M642 plug and three 6P
clips with red, green, and yellow rubber
boots. |
|
 |
|
| |
| Return
to the top
of the screen. |
|
|
| CS-35 |
| 3
ft. tinsel wire test set cord equipped with
6A clips and a double banana plug molded
to the lead. |
|
 |
|
| |
| Return
to the top
of the screen. |
|
|
| CS-126
TS-44 Cord |
| TS-44
Butt Set replacement cord. |
|
 |
|
| Click
here to return to the top
of the screen. |
|
|
| CS-128
Sidekick Cord |
| Sidekick
replacement cord. |
|
 |
|
| Click
here to return to the top
of the screen. |
|
|
| CS-500
Throwmaster |
| 500
Throwmaster Replacement cord with GMP Transfer
clip. |
|
 |
|
| Click
here to return to the top
of the screen. |
|
|
| CS-118
BNC Video Transfer Cord |
| |
| Click
here to return to the top
of the screen. |
|
